DESIGN OF TEMPERATURE AND CURRENT MONITORING SYSTEM IN COLD STORAGE USING ARDUINO AT CV JALADRA TEKNIK COLD STORAGE BANTUL, YOGYAKARTA

Doly Andrian Harahap; Ade Hermawan; M. Yusuf Syam; Hendro Sukismo; Teguh Binardi; Achmad Syarifudin; Riko Satriyo Wibowo

Authors

Doly Andrian Harahap Politeknik Ahli Usaha Perikanan
Ade Hermawan Politeknik Ahli Usaha Perikanan
M. Yusuf Syam Politeknik Ahli Usaha Perikanan
Hendro Sukismo Politeknik Ahli Usaha Perikanan
Teguh Binardi Politeknik Ahli Usaha Perikanan
Achmad Syarifudin Politeknik Ahli Usaha Perikanan
Riko Satriyo Wibowo Politeknik Ahli Usaha Perikanan

Keywords:

Cold Storage, Nodmcu Esp8266, Microcontroller

Abstract

Monitoring is an activity carried out to find out the process of running a program that has been designed, whether it is running well as planned and find out the problems that occur. The monitoring system will facilitate a job if it is designed and carried out effectively. In this study the authors have an innovation to make a temperature control device to be added to the cold storage unit machine, so that it can be monitored using a smartphone or PC when the refrigeration system is operated. Temperature control is done by Arduino. Meanwhile, monitoring will be done using the Blynk application from a smartphone when setting the temperature or monitoring. It is expected that the addition of facilities in the cold storage unit can simplify the setpoint setting. In addition, the value of temperature monitoring can be done remotely. The research material used is cold storage and the equipment used is Nodemcu Esp8266 microcontroller, dht22 temperature sensor, acs712 electric current sensor, 20x4 i2c (inter integrated circuit) LCD, micro usb cable, jumper cable, Casing Box X6, and workshop equipment, and other supporting equipment. Sensor reading results are displayed using the Blynk application or website

References

Artiyasa, Marina, Aidah Nita Rostini, Edwinanto, and Anggy Pradifta Junfithrana. 2021. “Aplikasi Smart Home Node Mcu Iot Untuk Blynk.” Jurnal Rekayasa Teknologi Nusa Putra 7(1): 1–7. doi:10.52005/rekayasa.v7i1.59.

Jaya, Gede Suwasnata, I Putu Gede Hendra Suputra, I Komang Ari Mogi, I Gusti Ngurah Anom Cahyadi Putra, Luh Gde Astuti, and Ngurah Agus Sanjaya. 2022. “Sistem Monitoring Temperatur Suhu Menggunakan Metode Message Queue Telemetry Transport (MQTT).” JELIKU (Jurnal Elektronik Ilmu Komputer Udayana) 11(4): 867. doi:10.24843/jlk.2023.v11.i04.p27.

Khotimah, Otin, Dudi Darmawan, and Endang Rosdiana. 2022. “Perangkat Dan Metoda Kalibrasi Sensor Universal.” e-Proceeding of Engineering 9(3): 866–74.

Musrinaldi, Deri, and Desriyeni. 2019. “Pembuatan Thermostat Sebagai Alat Pengatur Suhu Di Ruangan Penyimpanan Arsip.” Jurnal Ilmu Informasi Perpustakaan dan Kearsipan 7(2): 213–15.

Pratiwi Patahangi, Nirwana, Munawir Makmur, and Bernadetta Wiwik. 2022. “Rancang Bangun Alat Monitoring Suhu Pada Ruang Penyimpanan Bahan Kimia Di Hanggar Politeknik Penerbangan Makassar.” JAMETS : Journal of Aircraft Maintenance Engineering & Aviation Technologies 1(1): 7–10. doi:10.46509/jamets.v1i1.326.

Samsugi, Selamet, Zainabun Mardiyansyah, and Andi Nurkholis. 2020. “Sistem Pengontrol Irigasi Otomatis Menggunakan Mikrokontroler Arduino Uno.” Jurnal Teknologi dan Sistem Tertanam 1(1): 17. doi:10.33365/jtst.v1i1.719.

Saputra, Junior Sandro, and Siswanto Siswanto. 2020. “Prototype Sistem Monitoring Suhu Dan Kelembaban Pada Kandang Ayam Broiler Berbasis Internet of Things.” PROSISKO: Jurnal Pengembangan Riset dan Observasi Sistem Komputer 7(1). doi:10.30656/prosisko.v7i1.2132.