SISTEM INFORMASI SUPPLY CHAIN MANAGEMANT MINYAK CENGKEH PADA UD. AGUS DENGAN TEKNOLOGI WEBSITE

Gede Agus Dirtha Kristian; I Ketut Putu Suniantara; Shofwan Hanief

doi:10.53625/jirk.v1i3.180

Authors

Gede Agus Dirtha Kristian STIKOM Bali
I Ketut Putu Suniantara ITB STIKOM Bali
Shofwan Hanief

DOI:

https://doi.org/10.53625/jirk.v1i3.180

Keywords:

Clove Oil, UD. Agus, Supply Chain Management, Website

Abstract

Indonesia is an agricultural country that is rich in spices, one of which is cloves. Cloves are used as a spice for Indonesian kretek cigarettes. Besides that, the oil can also be taken from cloves. The clove oil is extracted from the flowers and leaves of cloves. UD. Agus is one of the shops that accepts the sale and purchase of clove oil, this process is done manually, namely by recording everything on paper and recapitulating it in a notebook. This process is less efficient, thus complicating the process of managing data within the company and this problem can be overcome by implementing Supply Chain Management in business processes implemented at UD. Agus, combined with implementation in an information technology. The technology applied is an information system with website technology, which is a technology that has a wide reach and is easily accessible by the internet network. This research was conducted following the flow of the Waterfall Method. The result of this research is a website-based Supply Chain Management information system. Based on the process of working and testing the system with the Blackbox Testing method, it can be concluded that the functions of the system are already running well. So that the system is suitable for use as an information system for Clove Oil Supply Chain Management at UD. Agus.

References

L. Pratiwi, M. S. Rachman, and N. Hidayati, “Ektraksi Minyak Atsiri dari Bunga Cengkeh dengan Pelarut Etanol dan N-Heksana,” in University Research Colloquium, 2016.

G. A. O. Telaumbanua, “Karakterisasi Minyak Daun Cengkeh (Syzygium aromaticum) yang Beredar di Pasaran,” Universitas Sumatera Utara, 2017.

A. Khozali, S. Supardi, and D. Hastuti, “Analisa Usaha Penyulingan Minyak Daun Cengkeh (Syzygium aromaticum, syn. Eugenia aromaticum) (Studi Kasus di Kecamatan Sukorejo Kabupaten Kendal),” MEDIAGRO, vol. 8, no. 2, pp. 32–42, 2012.

F. N. Affifah, M. Lutfi, and D. Kadarisman, “Studi Fasilitas Penyulingan Minyak Daun Cengkeh (Syzygium aromaticum L): Studi kasus UKM di Malang,” J. Keteknikan Pertan. Trop. dan Biosist., vol. 4, no. 1, pp. 20–26, 2016.

Saiful Hadi, “Pengambilan Minyak Atsiri Bunga Cengkeh (Clove Oil) Menggunakan Pelarut n-Heksana Dan Benzena,” J. Bahan Alam Terbarukan, vol. 1, no. 2, pp. 25–30, 2012.

H. Poernomo, M. T. Ma’ruf, Setiawan, and P. N. W. Wati, “Efektivitas Minyak Cengkeh dan Pulperyl ® dalam Menghambat Akumulasi Bakteri Streptococcus mutans secara In Vitro,” nterdental J. Kedokt. Gigi, vol. 14, no. 2, pp. 32–34, 2018.

E. B. Setiawan and A. Setiyadi, “Implementasi Supply Chain Management (SCM) Dalam Sistem Informasi Gudang Untuk Meningkatkan Efektifitas Dan Efisiensi Proses Pergudangan,” Semnasteknomedia Online, vol. 5, no. 1, pp. 1–2, 2017.

T. S. Syamfithriani, T. F. Nugraha, and E. Darmawan, “Implementasi Supply Chain Management (SCM)Toko Alat dan Bahan Bangunan Berbasis Web (Studi Kasus: TB. Bojong Indah),” INFOTECH J., vol. 6, no. 2, pp. 44–50, 2020.

W. Zulkarnaen, I. D. Fitriani, and N. Yuningsih, “Pengembangan Supply Chain Management Dalam Pengelolaan Distribusi Logistik Pemilu Yang Lebih Tepat Jenis, Tepat Jumlah Dan Tepat Waktu Berbasis Human Resources Competency Development Di KPU Jawa Barat,” urnal Ilm. MEA (Manajemen, Ekon. Akuntansi), vol. 4, no. 2, pp. 222–243, 2020.

J. Sasongko et al., “Perancangan Sistem Informasi SCM Produk Pertanian Berbasis Website,” Manaj. Rantai Pasokan Prod. Cengkeh Pada Desa Wawona Minahasa Selatan, vol. 1, no. 2, pp. 1241–1250, 2015.

N. Nuari, “Perancangan Aplikasi Layanan Mobile Informasi Administrasi Akademik Berbasis Android Menggunakan Webservice (Studi Kasus Reg. B Universitas Tanjungpura),” USTIN (Jurnal Sist. dan Teknol. Informasi), vol. 2, no. 1, pp. 1–6, 2014.

D. Akhiyar, “Perancangan Aplikasi Supply Chain Management Pada Distribusi Ayam Potong Pt. Nuj Mts Dengan Menggunakan Metode Distributor Requirment Planning (DRP),” Junal Sains Dan TeknolJurnal Keilmuan dan Apl. Teknol. Ind., vol. 16, no. 2, pp. 118–132, 2016.

T. Hidayat and M. Muttaqin, “Pengujian sistem informasi pendaftaran dan pembayaran wisuda online menggunakan black box testing dengan metode equivalence partitioning dan boundary value analysis,” J. Tek. Inform. UNIS, vol. 6, no. 1, pp. 25–25, 2018.

S. C. Wuwung, “Manajemen Rantai Pasokan..,” Manaj. Rantai Pasokan Prod. Cengkeh Pada Desa Wawona Minahasa Selatan, vol. 1, no. 3, pp. 230–238, 2013.

J. William, J. Pengabdian, K. Masyarakat, and F. I. Komputer, “Sistem Informasi Ukm Berbasis Website Pada Desa Sumber Jaya,” J. Teknol. Inf. dan Bisnis Pengabdi. Masy. Darmajaya, vol. 1, no. 1, pp. 1–16, 2015.

I. Binanto, “Analisa Metode Classic Life Cycle ( Waterfall ) Untuk Pengembangan Perangkat Lunak Multimedia,” in Seminar Nasional Sains dan Teknologi Informasi (SeNASTI), 2014, pp. 33–38.

M. . S. Mustaqbal, R. F. Firdaus, and H. Rahmadi, “Pengujian Aplikasi Menggunakan Black Box Testing Boundary Value Analysis (Studi Kasus : Aplikasi Prediksi Kelulusan SNMPTN),” J. Ilm. Teknol. Inf. Terap., vol. 1, no. 3, pp. 31–36, 2015.