ANALISIS POTENSI BAHAYA DAN RISIKO KECELAKAAN KERJA DI STASIUN PERSIAPAN (EMPLACEMENT) DI PT XYZ DENGAN PENDEKATAN JOB SAFETY ANALYSIS (JSA)

Muhammad Syauqi Ramadhani; Ferida Yuamita

doi:10.53625/jcijurnalcakrawalailmiah.v2i10.5985

Authors

Muhammad Syauqi Ramadhani Universitas Teknologi Yogyakarta
Ferida Yuamita Universitas Teknologi Yogyakarta

DOI:

https://doi.org/10.53625/jcijurnalcakrawalailmiah.v2i10.5985

Keywords:

Kesehatan Dan Keselamatan Kerja(K3), Job Safety Analysis(JSA), Potensi Bahaya, Manajemen Risiko

Abstract

PT XYZ merupakan perusahaan yang bergerak di bidang produksi gula pasir khususnya di P.G XYZ. Dalam proses produksinya, PT XYZ sudah menggunakan teknologi mesin yang canggih dan berukuran besar, sehingga dalam kegiatan produksinya PT XYZ telah menilai potensi terkait risiko kecelakaan kerja dari kategori ringan hingga kategori berat yang dapat berdampak pada kecacatan bahkan kematian. Sehingga perhatian terhadap keselamatan dan kesehatan kerja harus terus ditingkatkan, dengan menganalisis potensi bahaya dan risiko kecelakaan kerja sebagai upaya meminimalisir kecelakaan kerja di PT XYZ. Analisis potensi bahaya dan risiko kecelakaan kerja menggunakan metode Job Saftey Analysis (JSA). Dengan menggunakan Metode JSA, potensi bahaya yang terjadi dalam proses stasiun persiapan (emplacement) diidentifikasi terdiri dari tiga peringkat risiko, yaitu tingkat bahaya risiko tinggi 5 risiko, menunjukkan persentase 45,45%, tingkat bahaya risiko sedang, menunjukkan persentase 27,27%, tingkat bahaya Risiko Rendah, menunjukkan persentase 27,27%. Berdasarkan hasil JSA dan hierarki kontrol, rekomendasi kontrol diperoleh dalam bentuk kontrol eliminasi, kontrol administratif, dan alat pelindung diri.

References

AS/NZS 4360. (2004). Risk Management Guidelines. Sidney: Standards Australia/Standards New Zealand.

Bahaya, I., Pada, R., Confined, P., & Reparasi, S. (2022). Hazards Identification and Risk Assessment In Welding Confined Space Ship Reparation PT . X With Job Safety Analysis Method. Berkala Saintek. Surabaya: Universitas Hang Tuah. Vol 10, No 4, pp. 175–186.

Barpete, D. K., Shukla, V., & Gidwani, D. G. . (2017). Job Safety Analysis ( JSA ) With Risk Assessment In Welding Of TLB Dipper by Tack Welding. International Journal Of Science Technology And Engineering. India: S.K.S.I.T.S Indore. Vol 3, No 8, pp. 67–75.

Biglar, A., & Aleahmad, M. (2021). Risk Assessment Using Job Safety Analysis (JSA) Method: an industrial case study Applications and solutions of knapsack problem: A literature review View project Innovative Researcherss View project Risk Assessment Using Job Safety Analysis (JSA) Method. Industrial Paper. Iran: Islamic Azad University. Vol 2, pp. 54-78.

Gomeseria, R. V. (2020). Insight on Planning , Design & Construction Job Safety “ INSIGHT ON PLANNING , DESIGN & CONSTRUCTION JOB SAFETY .” Journal of Engineering Design and Construction Studies. Philippines: University of The Philippines Open University. Vol 6, 210-216.Schiffman, Mark, Philip E. Castle, Jose Jeronimo, Ana C. Rodriguez, and Sholom Wacholder. “Human Papillomavirus and Cervical Cancer.” The Lancet 370, no. 9590 (2007): 890–907.

Hussain Zahid, & Khan Jehan Zeb. (2018). Job Safety Analysis and Risk Assessment A case study of Frontier Ceramics Ltd. Journal of Engineering. Pakistan: Sarhad University of Science and IT. Vol 2, pp. 2–13.

Ishak, A., Buchari, Asfriyati, & Nainggolan, B. (2020). Risk Analysis of Occupational Accidents and Occupational Diseases Using the JSA (Job Safety Analysis Method. IOP Conference Series: Materials Science and Engineering. Medan: Universitas Sumatera Utara. Vol 1, pp. 10-14.

Mulyojati, P. A. M., & Yuamita, F. (2023). Analisis Potensi Bahaya Kerja Pada Proses Pencetakan Pengecoran Logam Menggunakan Metode Job Safety Analysis (JSA). Jurnal Teknologi dan Manajemen Industri Terapan, Vol 2, No2, pp 90-97.

Samma, M. Y., Jayadipraja, E. A., & Harun, A. (2021). The Application of Job Safety Analysis (JSA) Method in Identifying the Risk of Work Accidents in Charged Manpower in Bungkutoko Port, Kendari City. Indonesian Journal of Health Sciences Research and Development, pp. 8-17.

Sastrodiharjo, S., Sholihah, Q., & Zedniawan, E. (2019). Risk Level Analysis Using The Job Safety Analysis Method In Manufacturing System Laboratory. Engineering Journal. Malang: Universitas Brawijaya. Vol 2, pp. 4-8.

Tenda Ernestia, P. . S. R. F. (2021). Assessment of Job Risks in the Chemical Laboratory of the Pharmacy Study Program with Job Safety Analysis (JSA) Techniques. Jurnal Kesehatan Prima. Kupang: Poltekkes Kemenkes Kupang. Vol 15, pp. 125–132.

Widodo, I. D., & Dwinanda, N. R. A. (2020). Job Safety Analysis in Production Floor of PT BD Based on Semi Quantitative. Method. IOP Conference Series: Materials Science and Engineering. Yogyakarta: Universitas Islam Indonesia. Vol 722, pp. 12-26.

Widodo, I. D., & Dwinanda, N. R. A. (2020). Job Safety Analysis in Production Floor of PT BD Based on Semi Quantitative. Method. IOP Conference Series: Materials Science and Engineering. Yogyakarta: Universitas Islam Indonesia. Vol 722, pp 12-26.

Wojtyto, D., Rydz, D., Pałęga, M., & Arbuz, A. S. (2019). Job Safety Analysis in the Context of the Risk Management Process. System Safety: Human - Technical Facility - Environment. Poland: Czestochowa University of Technology. Vol 1, pp. 35–44.

Zarei, E., Azadeh, A., Khakzad, N., Aliabadi, M. M., & Mohammadfam, I. (2017). Dynamic Safety Assessment of Natural Gas Stations Using Bayesian Network. Journal of Hazardous Materials. Iran: Hamadan University of Medical Sciences. Vol 321, pp. 830–840.